08
2022
-
10
What should be noted about wet sand blasting machine?
The development prospect of the wet sand blasting machine industry is very good, because it brings more benefits to the enterprise when it is used, so it is favored by customers. In order to let everyone be more familiar with it, next we will tell about the precautions of the wet sand blasting machine? Hopefully it will help more people.
Nowadays, there are many people who do not understand some basic information of wet sandblasting machine, so as a manufacturer, it is necessary for us to briefly explain it. In fact, when operating wet sandblasting machine, we should pay attention to hand-held spray gun operation and wear goggles. Hold the gun firmly before starting the machine. Always check safety gloves for damage and do not allow spray water to come into direct contact with exposed skin. For the safety and hygiene of rubber, please wear latex film or cotton gloves on your hands. When wet sand blasting machine is not used, the operating door should be closed. In addition to these words, it is also important to note that the power should be cut off when the machine is not in use. Compressed air and water systems should also be turned off to prevent pipe bursts. Read the instructions carefully before use. Alternatively, ensure that power, water and compressed air are turned off in any way while repairs and maintenance work is carried out. Of course, the glass door, hinge, glass scraper in the process of operation often check to maintain good working condition. It is then recommended that you check the abrasive hoses, compressed air hoses and water hoses for damage.
The pipes and joints of the sandblasting equipment of the wet sandblasting machine are firmly installed to ensure safety. Check frequently for air leaks and pipe damage while working. Badly worn pipes should be replaced immediately to prevent explosions from injuring people around them. In the process of this operation, the spray gun of the wet sandblasting machine shall not be directed at others; Or we should pay attention to closing the air pressure equipment during maintenance, and all the air in the trachea should be discharged before maintenance or replacement of parts. When adding abrasive, the compressed air in the cylinder should be drained first, and then open the top cover; In addition, it is also important for the operator to wear a safety helmet, professional sandblasting overalls and sandblasting rubber gloves. Especially in the use of wet sand blasting machine and open sand blasting equipment; The air in the helmet is filtered through a filter and the air pressure is generally adjusted to 1.2Kg/cm2. Or work should be timely clean scaffolding and structural sand, pay attention to prevent slipping. If you do not understand the place can call our telephone at any time to consult, enter the official website can see the way to contact, you can also consult online customer service staff. Will help you to solve some problems in the quotation method.
The above article is a small series for you to introduce the precautions of wet sand blasting machine. If you don't know before friends can come to read.
Contact
Business line: Manager Chen 18819760019
After-sales service: Miss Su 18819760029
Address: 1st Floor, Building B, Henghaofeng Science and Technology Park, Xinxibian, Dongcheng Street, Dongguan City, Guangdong Province
Tel: 0769-22336646 Fax:0769-22336649
website: http://www.syi100.com
Email:sanyi@syi100.com
Expert WeChat
Official website
COPYRIGHT 2023 Dongguan Sanyi Machinery Technology Co., Ltd.
